Chapter 4. XClarity Provisioning Manager events
For each event code, the following fields are displayed:
Event identifier
An identifier that uniquely identifies an event.
Event description
The logged message string that appears for an event.
Explanation
Provides additional information to explain why the event occurred.
Severity
An indication of the level of concern for the condition. The severity is abbreviated in the event log to the 
first character. The following severities can be displayed: 
•  Informational. The event was recorded for audit purposes, usually a user action or a change of states 
that is normal behavior.
•  Warning. The event is not as severe as an error, but if possible, the condition should be corrected 
before it becomes an error. It might also be a condition that requires additional monitoring or 
maintenance.
•  Error. The event is a failure or critical condition that impairs service or an expected function.
User Action
Indicates what actions you should perform to solve the event. Perform the steps listed in this section in 
the order shown until the problem is solved. If you cannot solve the problem after performing all steps, 
contact Lenovo Support.
LXPM events organized by severity
The following table lists all LXPM events, organized by severity (Information, Error, and Warning).
Table 4.  Events organized by severity
Event ID
Message String Severity
FQXPMCL0005I Start to install OS. Informational
FQXPMCL0006I Export raid config successfully. Informational
FQXPMCL0007I Import raid config successfully. Informational
FQXPMCL0008I Export uefi settings successfully. Informational
FQXPMCL0009I Import uefi settings successfully. Informational
FQXPMCL0010I Export bmc settings successfully. Informational
FQXPMCL0011I Import bmc settings successfully. Informational
FQXPMEM0002I LXPM firmware image found. Starting LXPM Informational
FQXPMEM0003I LXPM has exited. Control returned to UEFI Informational
FQXPMEM0004I
Launching diagnostic program Informational
© Copyright Lenovo 2020, 2021 241