• FQXSPCA2011I: Numeric sensor [NumericSensorElementName] going high (upper non-
recoverable) has deasserted.
This message is for the use case when an implementation has detected an Upper Non-recoverable sensor
going high has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Temperature
SNMP Trap ID: 0
CIM Prefix: PLAT CIM ID: 0499
User Action:
Information only; no action is required
Service Action:
Information only; no action is required.
• FQXSPCA2015I: Sensor [SensorElementName] has deasserted the transition from normal to non-
critical state.
This message is for the use case when an implementation has detected that a Sensor has deasserted a
transition to non-critical from normal.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Temperature
SNMP Trap ID: 12
CIM Prefix: PLAT CIM ID: 0521
User Action:
Information only; no action is required
Service Action:
Information only; no action is required
• FQXSPCA2017I: Sensor [SensorElementName] has transitioned to a less severe state from critical.
This message is for the use case when an implementation has detected a Sensor transition to less severe
from critical.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Temperature
SNMP Trap ID: 0
CIM Prefix: PLAT CIM ID: 0523
User Action:
Information only; no action is required
32
ThinkSystem SR850 V2 System Events Service Guide
To Next Page
Loading...
