What to do if my Lenovo Y25-30 Monitor screen is blank and the power indicator is amber?
If the screen is blank and the power indicator is amber, it means the monitor is in Standby or Suspend mode. To restore operation, press any key on the keyboard or move the mouse. You can also check the Power options settings on your computer.
Why is my Lenovo Y25-30 Monitor power indicator not lit and there is no image?
If the power indicator is not lit and there is no image, it could be due to several reasons: * The monitor’s power switch is not switched on. * The power cord is loose or disconnected. * There is no power at the outlet. To resolve this: * Ensure the power cord is properly connected. * Verify the outlet has power. * Power on the monitor. * Try using another power cord. * Try using another electrical outlet.
What to do if the power indicator is amber, but there is no image on Lenovo Monitor?
If the power indicator is amber but there is no image, it could be because the video signal cable is loose or disconnected. Ensure the video cable is properly connected to the system. Also, the monitor's brightness and contrast might be at their lowest settings. Adjust the brightness and contrast settings on the OSD menu.
How to fix unacceptable image quality on Lenovo Monitor?
If the image quality is unacceptable, check the following: * Ensure the video signal cable is firmly plugged into both the system and the monitor. * Select another color setting from the OSD menu, as the current color settings may be incorrect. * Perform automatic image setup.
How to fix fuzzy lines or blurry image on Lenovo Y25-30?
If you are experiencing fuzzy lines in text or a blurry image, or if there are horizontal or vertical lines through the image, try the following: * Adjust the resolution settings on your system to match the native resolution for this monitor: 1920 x 1080 / 240Hz. * Perform automatic image setup. If automatic image setup does not help, perform manual image setup. * When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system.
Why does my Lenovo Y25-30 Monitor say "Out of Range"?
The "Out of Range" message appears because the system is set to a display mode that the monitor does not support. If you are replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer.
What to do if pixels appear discolored on Lenovo Y25-30 Monitor?
The appearance of one or more discolored pixels is a characteristic of LCD technology and not a defect.
General| Screen Size | 24.5 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Refresh Rate | 240 Hz |
| Panel Type | IPS |
| Brightness | 400 nits |
| Contrast Ratio | 1000:1 |
| Adaptive Sync | AMD FreeSync Premium |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178°/178° |
| Color Gamut | 99% sRGB |
| VESA Mount | 100 x 100 mm |
| HDR | HDR400 |
| Ports | 2 x HDMI 2.0, 1 x DisplayPort 1.4, 4 x USB 3.2 Gen 1 |
Essential safety precautions for operating and installing the monitor to prevent hazards.
Step-by-step guide for connecting cables and powering on the monitor for initial setup.
Instructions on using direct access controls for image adjustments.
Solutions for common problems encountered during setup or operation.
Step-by-step guide for manually installing the monitor driver in Windows.
To Next Page
