What to do if my Lenovo Monitor power indicator is amber, but there is no image?
Ensure the video cable is properly connected to both the system and your Lenovo monitor. Also, the brightness and contrast settings might be too low; adjust them via the On-Screen Display (OSD) menu.
What to do if my Lenovo Y25g-30 power indicator is not lit and there is no image?
First, make sure the power cord is correctly connected and the outlet has power. Then, power on the Lenovo monitor. If it still doesn't work, try a different power cord and electrical outlet.
What to do if my Lenovo Monitor screen is blank and the power indicator is amber?
To restore operation, press any key on the keyboard or move the mouse. Also, verify the power options settings on your computer.
How to fix fuzzy lines or blurry image on Lenovo Y25g-30 Monitor?
Adjust the resolution settings on your system to match the native resolution for this Lenovo monitor: HDMI : 1920 x 1080 / 240Hz, DP : 1920 x 1080 / 360Hz. Perform automatic image setup; if that doesn't help, perform manual image setup. For further improvements, adjust the Dots Per Inch (DPI) setting on your system.
How to fix the "Out of Range" message on my Lenovo Y25g-30?
This issue occurs when the system is set to a display mode not supported by the Lenovo monitor. If you're replacing an old monitor, reconnect it and adjust the display mode to the specified range for your new monitor. If using Windows, restart the system in safe mode and select a supported display mode. If these steps don't work, contact the Customer Support Centre.
General| Screen Size | 24.5 inches |
|---|---|
| Resolution | 1920 x 1080 (Full HD) |
| Refresh Rate | 360 Hz |
| Panel Type | IPS |
| Brightness | 400 nits |
| Adaptive Sync | NVIDIA G-Sync |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| Color Gamut | 99% sRGB |
| HDR | HDR400 |
| Stand Adjustability | Tilt, Swivel, Pivot, Height Adjustment |
| VESA Mount | 100 x 100 mm |
| Response Time | 1 ms |
| Ports | 1x DisplayPort 1.4, 2x HDMI 2.0, 1x USB 3.2 Gen 1 |
Tips for safe usage and installation of the monitor.
Steps to configure G-SYNC for optimal gaming performance.
How to change display settings and image parameters.
Navigating the OSD menu for advanced settings.
Solutions for common problems and error conditions.
Steps to install monitor drivers for Windows.
To Next Page
