Lenoxx CD-210 - Recording on a Tape

RECORDING ON A TAPE
Connect the supplied AC power cord or batteries (see page 4).
Press the STOP/EJECT button to
open the tape compartment and
insert a blank tape. Select the
program source (AM, FM, CD, or
built-in microphone) you want to
record.
1
2
To record from the CD player,
insert a CD and follow the steps to
play a CD (see page 8).
To record from a radio, press the
RADIO switch, and tune into the
station you want (see page 5).
To record from the built-in
microphone, press the TAPE
switch and speak in front of the
set.
3
14
Press the RECORD button to
start recording. (The PLAY button
is depressed automatically.)
INSERT TAPE THIS WAY
FULL REEL ON RIGHT
1
3
4
To hear what you recorded, press
TAPE switch, then REWIND and
PLAY.