●Push the wheel to the front axle.
●Put an axle sleeve and a gasket, then tighten them with a nut.
● Insert the wheel cover.
●The other wheel is to be installed in the same way.
Steering wheel installation:
●Connect the terminal of the steering wheel to terminal of the instrument panel,
put some of the wire back inside instrument panel if it is too long.
●Ensure the two holes of the steering wheel connect with the holes in the instrument panel,
and then tighten the M5 nut well with M5*35 round nut.
Mirror installation:
● Ensure the slots in
the mirror are in line
with the slots in ride‐
on body and press the
mirrors into the gaps.
To Next Page
Loading...