Need help?Do you have a question about the LENVII F510 and is the answer not in the manual?
Introduces the connection methods supported by the LENVII barcode scanner.
Shows the USB and RS232 interfaces on the host for connection.
Details the steps for connecting the barcode scanner via a USB port.
Details the steps for connecting the barcode scanner via an RS232 cable.
Explains the aiming beam and positioning for successful barcode scanning.
Instructions on how to reset the barcode scanner to its factory default settings.
Introduces the USB and RS232 interface types and their related configurations.
Covers RS232 baud rate settings and word length (data bits, stop bits, parity).
Details programming options for USB PC Keyboard and USB Serial emulation.
Introduces configuration for beep and LED indicators for scanner feedback.
Configures startup, trigger click, good read beeps, volume, frequency, and duration.
Configures the Good Read LED indicator and the delay before reading another barcode.
Describes how to add prefixes and suffixes to scanned data.
Covers adding, clearing, and selecting prefixes and suffixes for symbologies.
Details performing operations via keyboard configuration during decoding output.
Allows setting delays between successive scan transmissions.
Explains how to adjust the scanner for different barcode properties and types.
Options to enable or disable decoding for all, 1D, or 2D symbologies.
Covers key settings like Check Character and Message Length for various symbologies.
Lists and describes 2D symbologies like PDF417, QR Code, Data Matrix, and Aztec.
Outputs the current software revision, unit serial number, and other product information.
Provides guidelines for cleaning and maintaining the barcode scanner's components.
Offers contact information for installation, troubleshooting, and support.
Presents charts detailing symbology IDs, AIM modifiers, and LENVII hex values.
Lists ASCII character representations corresponding to Hex and Decimal values.
Illustrates sample barcodes for various symbologies used by the scanner.
Provides barcodes used for programming specific scanner configurations.
General| Brand | LENVII |
|---|---|
| Model | F510 |
| Category | Barcode Reader |
| Language | English |
To Next Page
