Need help?Do you have a question about the LENVII E688 and is the answer not in the manual?
Details how to connect the barcode scanner using a USB port.
Details how to connect the barcode scanner using an RS232 cable.
Explains how to aim the scanner and read barcodes.
Instructions to reset the scanner to factory default settings.
Configuration details for the RS232 interface, including baud rate and parity.
Options for setting the baud rate for RS232 communication.
Configuration options for data bits, stop bits, and parity in RS232.
How to program the scanner for USB PC Keyboard emulation.
How to program the scanner to emulate an RS232 COM port via USB.
Step-by-step guide for adding prefixes and suffixes to scanned data.
Explains configuring scanner operations via decoding output.
Configuration settings for Codabar symbology.
Configuration settings for Code 39 symbology.
Configuration settings for Interleaved 2 of 5 symbology.
Configuration settings for NEC 2 of 5 symbology.
Configuration settings for Code 93 symbology.
Configuration for Straight 2 of 5 Industrial symbology.
Configuration for Straight 2 of 5 IATA symbology.
Configuration settings for Matrix 2 of 5 symbology.
Configuration settings for Code 11 symbology.
Configuration settings for Code 128 symbology.
Configuration settings for GS1-128 symbology.
Configuration settings for Telepen symbology.
General| Brand | LENVII |
|---|---|
| Model | E688 |
| Category | Barcode Reader |
| Language | English |
To Next Page
