LENVII E688 - UPC-E1; EAN;JAN-13

LENVII
71 www.lenvii.net
UPC-E1
Most U.P.C. barcodes lead with the 0 number system. For these codes,
use UPC-E0. If you need to read codes that lead with the 1 number
system, use the UPC-E1 On selection. Default = Off.
(9140091.)
UPC-E1 On
EAN/JAN-13
(9140090.)
* UPC-E1 Off
<Default All EAN/JAN Settings>
(915000.)
Default All EAN/JAN-13 Settings
On/Off
(9150011.)
*On
(9150010.)
Off
Note: If you want to convert UPC-A barcodes to EAN-13 format, scan the
UPC-A Off barcode.