LENVII E688 - Han Xin Code

LENVII
88 www.lenvii.net
Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data. Default = Don’t Transmit.
(9370041.)
On
(9370040.)
* Off
Han Xin Code
<Default All Han Xin Code Settings>
(932000.)
Default All Han Xin Code Settings
On/Off
(9320011.)
On
(9320010.)
* Off
Message Length
Scan the barcodes below to change the message length. Refer to Message
Length Description for additional information. Minimum and Maximum
lengths = 1-1000. Minimum Default = 1, Maximum Default = 1000.