LENVII E688 - NEC 2 of 5

LENVII
50 www.lenvii.net
NEC 2 of 5
< Default All NEC 2 of 5 Settings >
(903000.)
Default All NEC 2 of 5 Settings
On/Off
(9030011.)
* On
(9030010.)
Off
Check Digit
No Check Digit indicates that the scanner reads and transmits barcode
data with or without a check digit.
When Check Digit is set to Validate, but Don’t Transmit, the unit only
reads NEC 2 of 5 barcodes printed with a check digit, but will not transmit
the check digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only reads
NEC 2 of 5 barcodes printed with a check digit, and will transmit this digit
at the end of the scanned data. Default = No Check Digit
(9030020.)
* No Check Digit