LENVII E688 - Codabar

LENVII
38 www.lenvii.net
Codabar
(900000.)
Default All Codabar Settings
On/Off
(9000031.)
* On
(
9000
030.)
Off
Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the barcode. You
may either transmit, or not transmit Start/Stop characters.Default = Don’t
Transmit.
(9000061.)
Transmit
(9000060.)
* Don’t Transmit
Check Character
No Check Character indicates that the scanner reads and transmits barcode
data with or without a check character.
When Check Character is set to Validate and Transmit, the scanner will only
read Codabar barcodes printed with a check character, and will transmit this
character at the end of the scanned data.
When Check Character is set to Validate, but Don’t Transmit, the unit will only
read Codabar barcodes printed with a check character, but will not transmit the