LENVII
47 www.lenvii.net
< Default All Interleaved 2 of 5 Settings >
(902000.)
Default All Interleaved 2 of 5 Settings
On/Off
(9020021.)
* On
Check Digit
No Check Digit indicates that the scanner reads and transmits barcode
data with or without a check digit.
When Check Digit is set to Validate, but Don’t Transmit, the unit only
reads Interleaved 2 of 5 barcodes printed with a check digit, but will not
transmit the check digit with the scanned data.
When Check Digit is set to Validate and Transmit, the scanner only
reads Interleaved 2 of 5 barcodes printed with a check digit, and will
transmit this digit at the end of the scanned data. Default = No Check
Digit.
(9020010.)
* No Check Digit
To Next Page
Loading...
