LENVII
44 www.lenvii.net
This function allows the scanner to append the data from several Code 39
barcodes together before transmitting them to the host computer. When
the scanner encounters a Code 39 barcode with the append trigger char-
acter(s), it buffers Code 39 barcodes until it reads a Code 39 barcode that
does not have the append trigger. The data is then transmitted in the order
in which the barcodes were read (FIFO). Default = Off.
(9010021.)
On
(9010020.)
* Off
Example
After sanning on barcode, scan the three bar codes below in order. The
barcode scanner does not output any data until the last bar code is
scanned. After scanning the ESS barcode, the SUCCESS word is output
correctly.
SU
CC
ESS
To Next Page
Loading...
