LENVII
65 www.lenvii.net
The numeric system digit of a U.P.C. symbol is normally transmitted at the
beginning of the scanned data, but the unit can be programmed so it will
not transmit it. Default = On.
(9120051.)
* On
This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
(9120011.)
2 Digit Addenda On
(9120010.)
* 2 Digit Addenda Off
(9120021.)
5 Digit Addenda On
(9120020.)
* 5 Digit Addenda Off
To Next Page
Loading...
