16 Information BM3
1 Important safety instructions
The ABC modules BM1, BM2 and BM3 may only be used with Digital plus by Lenz
®
or other
standard digital control systems with a NMRA-conformance seal. If in doubt, ask the system
supplier.
The current-carrying capacities stated below may not be exceeded as this could damage the block
section module!
2 Technical Data:
Maximum continuous current-
carrying capacity
3 Requirements for using the ABC technology
To use the ABC technology with BM1, BM2 and BM3 block section modules, you will need
locomotive decoders of the GOLD series or other decoders that support the ABC technology.
To Next Page
Loading...
Need help?
General
