Lenz Digital Plus BM3 User Manual

21
E
If the constant braking distance has been set correctly in the decoder, the train will stop on the right
spot in front of the block signal.
As soon as the next block is clear again, the signal will switch to "Clear" and the train will
accelerate with the starting delay set in the decoder.
The above procedure requires that the first coach of the rear-powered (pushed) train is fitted
with a power consumer, e.g. interior lighting.

Lenz Digital Plus BM3 Specifications

General

Brand	Lenz
Model	Digital Plus BM3
Category	Control Unit
Language	English