12 First Steps SET101
1 Important advice, please read first!
The components of the SET101 of the
Digital plus by Lenz
®
system
were submitted to intensive testing before delivery. Lenz Elektronik
GmbH guarantees fault-free operation if you follow the advice given
below:
The components of the SET101 are authorised for operation only with
other components of the
Digital plus by Lenz
®
system. Any use other
than the one described in these operating manuals is not permitted
and all guarantees become invalid if the SET101 is used in an
inappropriate way. Only use the devices contained in the SET101 in
accordance with the information given in the operating manuals.
If you have any problems, just contact us, stating the following
information together with a description of the problem:
Version and service number of the manual control LH101.
Version and service number of the LZV200.
Designation, version and service number of other components
with which you experience the same problem.
This will help our service department to resolve the problem. Thank
you.
2 Range of functions of the SET101
With the SET101 you may:
control up to 9999 digital locomotives and
1 conventional locomotive
switch up to 28 functions in locomotive decoders
set functions in locomotive decoders to continuous or
instantaneous operation
set the running notches mode to the locomotive addresses
assemble, control and delete multiple and double tractions
program in operational mode
program on the programming track
switch up to 1024 points and other magnetic articles
query and display feedbacks
using the integrated computer-Interface
To Next Page
Loading...
Need help?
General