Why is my Lenze 12.602.10 Engine experiencing excessive temperature?
If your Lenze Engine is overheating, it could be due to several reasons. First, check for an overload and reduce the load, ensuring the drive and machine combination is correct. Second, ensure sufficient heat dissipation by improving the cooling air supply and cleaning the gearbox/motor. Lastly, verify the lubricant level and refill as specified.
What to do if Lenze Engine drive is at a standstill?
If your Lenze Engine drive is at a standstill, there are a few potential causes. First, check the connection to ensure the voltage supply hasn't been interrupted. Second, verify that the electrical connection is correct and that the nameplate matches the voltage supply. Finally, check for excessive load and reduce it, ensuring the drive and machine combination is appropriate.
Why does my Lenze 12.602.10 Engine make unusual noise?
Unusual noises from your Lenze Engine can stem from a couple of issues. One potential cause is an overload, in which case you should reduce the load and check the drive/machine combination. Another possibility is damage within the gearbox or motor, which requires contacting Lenze Service.
What to do if Lenze 12.602.10 Engine motor is running, but gearbox is at standstill?
If the motor of your Lenze Engine is running but the gearbox is at a standstill, it could be because the fixing elements are missing or defective, so check the attachment. Alternatively, the gearbox itself might be defective, in which case you should contact Lenze Service.
Defines 'Operator' and 'Skilled personnel' and outlines their responsibilities for ensuring safe operation.
Presents tables detailing the weights of various gearbox types and sizes, including geared motors.
Covers the procedures and general information required for the mechanical installation of drive systems.
Outlines safety measures, mounting surface requirements, and alignment for drive system assembly.
Explains the step-by-step process for mounting motors onto gearboxes with a mounting flange, providing technical data.
Describes how to mount gearboxes with hollow shafts onto machine shafts and secure them axially.
Guides on correctly connecting the motor by referring to terminal box notes, motor instructions, and nameplate data.
Lists essential checks before commissioning the drive, including damage, connections, and transport locking devices.
Advises on periodically checking the drive during operation for abnormal noises, vibrations, or leakages.
To Next Page
General
