Why is my Lenze 12.602.12 Engine experiencing excessive temperature?
If your Lenze Engine is overheating, it could be due to several reasons. First, check for an overload and reduce the load, ensuring the drive and machine combination is correct. Second, ensure sufficient heat dissipation by improving the cooling air supply and cleaning the gearbox/motor. Lastly, verify the lubricant level and refill as specified.
What to do if Lenze 12.602.12 Engine drive is at a standstill?
If your Lenze Engine drive is at a standstill, there are a few potential causes. First, check the connection to ensure the voltage supply hasn't been interrupted. Second, verify that the electrical connection is correct and that the nameplate matches the voltage supply. Finally, check for excessive load and reduce it, ensuring the drive and machine combination is appropriate.
Why does my Lenze Engine make unusual noise?
Unusual noises from your Lenze Engine can stem from a couple of issues. One potential cause is an overload, in which case you should reduce the load and check the drive/machine combination. Another possibility is damage within the gearbox or motor, which requires contacting Lenze Service.
What to do if Lenze Engine motor is running, but gearbox is at standstill?
If the motor of your Lenze Engine is running but the gearbox is at a standstill, it could be because the fixing elements are missing or defective, so check the attachment. Alternatively, the gearbox itself might be defective, in which case you should contact Lenze Service.
Defines roles and responsibilities for safe operation of drive systems.
Presents general safety precautions and warnings for drive systems to prevent hazards.
Tables providing weight specifications for various gearbox types and motor frame sizes.
General information and procedures for mounting drive systems correctly onto machinery.
Detailed steps for mounting motors onto gearboxes using a flange, including diagrams and dimensions.
Procedures for mounting gearboxes with hollow shafts and keyways onto machine shafts.
Specific instructions for attaching transmission components to solid shafts using centering threads.
Guidance on correctly connecting the motor, referencing other documentation and nameplate data.
Checks to perform before initial power-up to ensure safe and proper operation.
To Next Page
General
