Need help?Do you have a question about the Lenze 534*E 3A series and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Series | 534*E 3A |
| Protection class | IP20 |
| Operating temperature | 0°C to +40°C |
| Storage temperature | -25°C to +70°C |
| Relative humidity | < 95% (non-condensing) |
| Communication interface | CANopen |
| Encoder feedback | Incremental encoder |
| Control modes | V/f control, sensorless vector control, vector control with encoder |
General safety and application notes, including operation, transport, installation, commissioning, and maintenance by qualified personnel.
Safety precautions for electrical installation, including national regulations, EMC compliance, and connection conditions.
Requirements for system equipment, protective devices, and operational safety, including prohibition of modifications and capacitor discharge.
Detailed technical specifications for each controller type (531, 532, 533, 534), including output power, voltage, current, and dimensions.
Procedures and safety precautions for connecting the controller, including handling electrostatic sensitive components and residual current devices.
Instructions for reducing the maximum output current by adjusting the 'Imax' trimmer using a moving coil ammeter.
To Next Page
