Lenze EMZ2221IB - User Manual

Questions and Answers

H
Holly JohnsonAug 13, 2025
What to do if Lenze Storage displays E 2 error?
- J
  Jody EvansAug 13, 2025
  If the Lenze Storage displays an E 2 error, it could be due to several reasons. First, ensure the memory card is correctly inserted. If it is, check if the memory card is write-protected and, if so, move the slide switch to the 'unlock' position. The error may also indicate that the memory card is not supported; in this case, use a supported memory card. Finally, if all data records on the memory card are defective, delete them using the 'Card File Handler' program to allow the memory card to be written to again.
A
Alan HarrisAug 17, 2025
What does it mean when Lenze Storage displays E 4?
- K
  Keith OneillAug 17, 2025
  If the Lenze Storage displays E 4, it could be due to AIF access protection being activated in the basic device. To resolve this, deactivate AIF access protection in the basic device by setting C0096/1 = 0. Alternatively, the error might indicate that the data transmission was truncated or faulty, so restart data transmission.
N
Nicholas HawkinsAug 20, 2025
What does it mean when Lenze Storage displays E F?
- J
  Jacob StevensAug 20, 2025
  If Lenze Storage displays 'E F', the memory card may not be formatted or the memory card might be defective. Try formatting the memory card by pressing button T3; during formatting, the letter F will be indicated on the 7-segment display. If formatting doesn't solve the problem, replace the memory card.
L
Lisa HaleAug 25, 2025
What to do if Lenze EMZ2221IB displays E 5?
- H
  Heather ScottAug 25, 2025
  If the Lenze Storage displays E 5, it means the PLC program contains technology functions which cannot be transferred to the existing basic device. If you are using a Servo PLC, use version 'T'. For ECS, use version ECSxA, ECSxS, ECSxM, or ECSxP.
N
Nicole BenderAug 28, 2025
Why does Lenze EMZ2221IB display E 8?
- K
  Kathleen GrahamAug 28, 2025
  Lenze Storage displays E 8 because the program is incompatible with the basic device. To fix this, press key T3 and write a compatible program on the memory card.
A
Adam JohnsonSep 1, 2025
What does it mean when Lenze EMZ2221IB Storage displays E 3?
- H
  Henry NolanSep 1, 2025
  If the Lenze Storage displays E 3, the basic device is not ready for operation. To resolve this, reset TRIP in the basic device and, if necessary, disconnect the mains.
J
John NorrisSep 4, 2025
What to do if Lenze Storage displays E 6?
- W
  Wayne CummingsSep 5, 2025
  If the Lenze Storage displays E 6, the basic device is either unknown or not supported. Use a card module with supported basic devices only.
J
Joshua RobinsonSep 8, 2025
What to do if Lenze EMZ2221IB Storage displays E 7?
- J
  Johnny WatersSep 9, 2025
  If the Lenze Storage displays E 7, the stored data of the selected program memory location are faulty. Choose another program memory location.