Function library
Positioning control
3.4.8 Homing
3−57
l
EDSVS9332P−EXT DE 2.0
3.4.8.11 Set homing value
9300pos042
Purpose
If the home position is known (e.g. by a higher−level master system), homing is not necessary.
Function
l Select "Set homing value" under "PS mode" in the PS (C1311 = 4).
l In this case, the current position is the reference point.
l The zero points of the measuring systems are set accordingly ( 3−34).
To Next Page
Loading...