Function block library
7-100
SHB9300CRV EN 2.0
Freezing of the output value
With CURVEC1-HOLD = HIGH the output signals remain the same as of the switching instant
independently of possibly changing input value.
The output are enabled again with CURVEC1-HOLD = LOW. Depending on the function, the output
values change immediately to the now valid input values.
Stop!
They change suddenly!
Cam profile with relative feed
Profiles with relative feed are used for endless drives, e.g. feed processes. The end value of such
a profile is not identical with its start position.
Endless drives are for instance:
l
conveyor belts
l
round tables with a feed over the entire revolution.
Select this function as follows:
CURVEC1-REL-SEL = HIGH (e.g. FIXED 1)
Examples
X
L
REL_ VOR1
LLL
REL_ VOR
2
L = Profile length
To Next Page
Loading...