Lenze g500-B - Motor Connection; Connection Via ICN Connector

Motor c
onnecon
Connecon via ICN connector
The electrical connecon to the servo motors as a standard is established via ICN connectors.
The connectors can be rotated by 270 ° and are provided with a bayonet catch. Since the catch
of the connector is also compable with convenonal box nuts, exisng mang connectors
with a screw plug can connue to be used without any problems.
Motors with a digital absolute value encoder are connected via a hybrid connector for the
one-cable technology. The connecon takes place via a Lenze hybrid system cable.
The advantage: all the required wiring takes place in just one plug.
In order to provide for a quick and error-free c
onnecon of Lenze motors to
Lenze inverters, we recommend using prefabricated Lenze system cables. In this
way, proper funconing and the compliance with statutory provisions such as
EMC, UL, etc. are ensured.
The use of dierent cables may cause unexpected faults and may void the
warranty.
Posion of the connecons
1
2
3
Posion Meaning Posion Meaning
1 Connector, ICN-M23 6-pole
Connect
or, ICN-M40 8-pole
•
Power connecon
•
Brake connecon
•
PE connecon
3 Connector, ICN-M23 hybrid
•
Power connecon
•
Brake connecon
•
PE connecon
•
Terminal for digital absolute value encoder
•
Connecon of temperature monitoring
2 Connector ICN-M23
•
Feedback connecon
•
Connecon of temperature monitoring
Product extensions
Mot
or connecon
Connecon via ICN connector
112