Lenze g500-B - Final Configuration; Environmental Conditions

Final c
onguraon
Check
Connecon dimensions Output sha
Output ang
e/foot
Mounng posion Geared motor
Driven sha/output ange
Product extensions Torque support
Sha cover
Brake
Feedback
Temperature monitoring
More in
formaon about the nal conguraon:
4The modular system ^ 10
4Product extensions ^ 104
Environmental condions
Surface and corrosion protecon
Depending on the ambient condions, the surface and corrosion protecon system (called
OKS) oers tailor-made soluons for opmum protecon.
Various surface coangs ensure that the motors operate reliably even at high air humidity, in
outdoor installaon or in the presence of atmospheric impuries. Any colour from the "RAL
Classic" collecon can be chosen for the top coat.
The OKS-XL (extra Large) version requires a check by your responsible Lenze
sub
sidiary.
Surface and corrosion
protecon
Applicaons Product g500
OKS-G (primed)
•
Dependen
t on subsequent top coat applied Standard
OKS-S (small)
•
Standard applicaons
•
Internal installaon in heated buildings
•
Air humidity up to 90%
Oponal
OKS-M (medium)
•
Internal installaon in non-heated buildings
•
Covered, protected external installaon
•
Air humidity up to 95 %
Oponal
OKS-L (large)
•
External installaon
•
Air humidity above 95 %
•
Chemical industrial plants
•
Food industry
OKS-XL (extra Large)
•
External installaon
•
Air humidity above 95 %
•
Chemical industrial plants
•
Food industry
•
Coastal areas with moderate salinity
Surface and corrosion
pr
otecon
Corrosivity category Surface coang Colour Coang thickness
DIN EN ISO 12944-2 Design
OKS-G (primed)
•
2K PUR priming c
oat 60 ... 90 µm
OKS-S (small) Comparable to C1
•
2K-PUR top coat
•
Standard: RAL 7012
•
Oponal: RAL Classic
80 ... 120 µm
OKS-M (medium) Comparable to C2
•
2K PUR priming coat
•
2K-PUR top coat
110 ... 160 µm
OKS-L (large) Comparable to C3 140 ... 200 µm
OKS-XL (extra Large) Comparable to C4
•
2K-EP priming coat (two mes)
•
2K-PUR top coat
160 ... 240 µm
Informaon on pr
oject planning
Final conguraon
Environmental condions
28