Mechanical installation
Important notes
4
19
Lenze ¯ MA 12.0013 ¯ 3.0
4 Mechanical installation
4.1 Important notes
¯ Use load carrying equipment for transport!
¯ Before the transport
– check that all components are safely mounted,
– fasten all transport aids (eye bolts or support plates).
Danger!
Danger due to toppling or falling loads!
¯ The payload of the hoists and load handling devices must at least
correspond to the weight of the load.
¯ Secure the load handling device so that it won’t slip from its position.
¯ The load must be secured in such a way that it cannot topple or fall
down.
¯ Do not stay under a pending load!
4.2 Transport
Danger!
The motors attached to the gearbox are partially equipped with eyebolts.
They are exclusively determined for mounting/dismounting the motor to
the gearbox and must not be used for the complete geared motor!
Fig. 1 Ear for transporting the complete drive system
Stop!
Observe load carrying capacity!
Standing beneath floating loads is prohibited!
To Next Page
Loading...
