Safety engineering
Safety functions
Safe PROFIsafe connection
1
1.3
1.3.5
1.3-9
EDS94AYAD EN 2.2
1.3.5 Safe PROFIsafe connection
1.3.5.1 Conditions
The SM300 supports the transmission of safe information on the PROFIsafe
protocol according to the specification ”PROFIsafe - Profile for Safety
Technology”, Version 1.30, of the PROFIBUS Nutzerorganisation (PNO). The
basic device transmits the PROFIsafe information to the SM300 for s afe
evaluation.
Condition for using the function:
ƒ The basic device must be equipped with a communication module
E94AYCPM (PROFIBUS-DP), SW version 0.9 and connected to the
PROFIBUS.
ƒ The basic device must receive PROFIBUS data telegrams from a master
controller.
To Next Page
Loading...
