Lenze M Series - Page 30

Electrical installation 6
Plug connectors
Feedback system
6.3.4 Feedback system
Resolver (external view of poles)
Pin Designation Meaning M23
1
2
+Ref
-Ref
Transformer windings
(reference windings)
Code 0°
3 +VCCENP Supply: electronic nameplate 1 *
4
5
+COS
-COS
Stator windings cosine
6
7
+SIN
-SIN
Stator windings
Sine
8 Ьз 10о12бЛ
9
10
Not assigned
11
12
+KTY
-KTY
Thermal sensor KTY
Incremental encoder / sin/cos absolute value encoder Hiperface (external view of poles)
Pin Designation Meaning M23
1 B Track B / + SIN
Code 20°
2 A Track A inverse / - COS
1
3 A Track A / + COS
шщ
4
5
+ Ub
GND
Supply +
Mass
6 Z Zero track inverse / - RS485
7 Z Zero track / + RS485
8 Not assigned
9 B Track B inverse / - SIN
10 Not assigned
11
12
+KTY
-KTY
Thermal sensor KTY
MT plug-in
connector-001.iso/dms
Sin/cos absolute value encoder with EnDat interface (external view of poles)
Pin Designation Meaning M23
1 UP sensor Supply UP sensor
2
3
Not assigned
4 0 V sensor 0 V sensor supply
Code 0°
5
6
+KTY
-KTY
Thermal sensor KTY
7
+ Ub
Supply + / +VCC ENP 1
8
9
Cycle
Cycle
Clock pulse EnDat interface
Clock pulse inverse EnDat
interface
1 4 Щ10 GND Mass
11 Shield Shield for housing of encoder
12
13
B
B
Track B
Track B inverse
14 Data Data EnDat interface
15 A Track A
16 A Track A inverse
17 Data Data inverse EnDat interface
EN
1) Only for versions with electronic nameplate ENP.
* At times, older documents also stated plug sizes of 1.0 (M23) and 1.5 (M40).
Lenze • BA 33.0006 • 3.0
31