Lenze m550-H-P63 80 Series - Installation; Mounting Positions

Installaon
•
The mounng surfaces must be plane, torsionally rigid and free from vibraons.
•
The mounng areas must be suited to absorb the forces and torques generated during
operaon.
•
Ensure an unhindered venlaon.
•
For versions with a fan, keep a minimum distance of 10 % from the outside diameter of the
fan cover in intake direcon.
Mounng posions
The lubricant amount and gearbox venlaon are adapted to the mounng
posion. The mounng posion indicated on the nameplate must be observed
to avoid damages to the gearbox.
M1 [ A ]
M2 [ D ]
M5 [ E ]
M3 [ B ]
M4 [ C ]
M6 [ F ]
Mechanical installaon
Installaon
Mounng posions
22