Lenze M850 Series - Page 9

Gearbox protecon
•
Excessive vibraon acceleraons and resonances will damage the gearbox.
-
Do not operate the gearbox at vibraon acceleraons > 2 g (20 m/s
2
) of the machine.
-
Do not operate the gearbox in the resonance range of the machine.
•
Excessive torques will damage the gearboxes.
-
Do not exceed the output torques specied on the nameplate.
•
Excessive input speeds lead to increased temperatures.
-
Do not exceed the input speeds specied on the nameplate.
•
Avoid excessive lateral forces on the gearbox sha.
-
Align the shas of the gearbox and driven machine exactly with each other.
•
Machine elements can be damaged by a lack of lubricant.
-
Mount the gearbox only in the mounng posion indicated on the nameplate.
-
When changing the lubricant, use the lubricant type and quanty specied on the
nameplate.
Safety instrucons
Residual hazards
9