Mechanical installation
Installation information
15
H1_MechINS-verbindung-buchse-motorstecker
Lenze • MA 33.0003 • 5.0
3 Mechanical installation
Installation information
ƒ Before the transport
– check that all components are safely mounted,
– check that all component parts with a loose fastening are secured or removed,
– fasten all transport aids (eye bolts or support plates).
Danger!
Danger due to toppling or falling loads!
ƒ The payload of the hoists and load handling devices must at least
correspond to the weight of the load, For weights see the , catalogue.
ƒ The load must be secured in such a way that it cannot topple or fall down.
ƒ Do not stay under a pending load!
Stop!
The shaft must not be exposed to knocks or bumps! Motor can be destroyed!
Drive elements must be mounted on the motor shaft via the threading. An
extracting device must be used when dismounting. Fasten coupling securely.
Securely fasten motor and ensure unimpeded ventilation.
To Next Page
Loading...
