Lenze SMD Series User Manual

Copyright © 2005 AC Technology Corporation
All rights reserved. No part of this manual may be reproduced or transmitted in any form
without written permission from AC Technology Corporation. The information and technical
data in this manual are subject to change without notice. AC Technology Corporation makes
no warranty of any kind with respect to this material, including, but not limited to, the implied
warranties of it’s merchantability and fitness for a given purpose. AC Technology Corporation
assumes no responsibility for any errors that may appear in this manual.
All information given in this documentation has been carefully selected and tested for
compliance with the hardware and software described. Nevertheless, discrepancies cannot
be ruled out. We do not accept any responsibility nor liability for damages that may occur.
Any necessary corrections will be implemented in subsequent editions.
This document printed in the United States

Lenze SMD Series Specifications

General

Output Voltage	0 to Input Voltage
Protection Class	IP20
Overload Capacity	150% for 60 seconds
Braking Resistor	Optional
Control Method	V/f control
Communication	CANopen
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature
Power Range	0.25 kW to 22 kW
Ambient Temperature	-10°C to +50°C (without derating)