Lenze i950 Series - User Manual

Umrichter
Inv
erter i950-Cabinet
0.37 kW ... 110 kW
0.5 hp ... 150 hp
1-phasiger Netzanschluss 230/240 V
3-phasiger Netzanschluss 230/240 V
3-phasiger Netzanschluss 400 V
3-phasiger Netzanschluss 480 V
Inverters
i950 cabinet inverter
0.37 kW ... 110 kW
0.5 hp ... 150 hp
1-phase mains connecon 230/240 V
3-phase mains connecon 230/240 V
3-phase mains connecon 400 V
3-phase mains connecon 480 V
Montage- und Einschaltanleitung | Mounng and swit
ch-on instrucons

Summary

Mounting and Switch-on Instructions

Inverter Series Overview

Introduces the i950 cabinet inverter series and its key specifications.

Safety Instructions

Safety Guidelines and Precautions

Covers essential safety measures, intended use, misuse, and residual hazards.

Electrical Installation

Mains Connection Details

Wiring and connection for single and three-phase mains at various voltages.

Functional Safety Implementation

Guidance on implementing Basic Safety (STO) and Extended Safety functions.

Commissioning

Commissioning Procedures and Tools

Lenze i950 Series Specifications

General

Protection Class	IP20
Overload Capacity	150% for 60 seconds
Altitude	Up to 1000 m without derating
Control Modes	V/f control, vector control, servo control
Communication Interfaces	EtherCAT, PROFINET, CANopen, Modbus TCP
Ambient Temperature	-10°C to 40°C
Safety	STO (Safe Torque Off), SS1 (Safe Stop 1), SLS (Safely Limited Speed)
Cooling Method	Air cooling
Frequency Range	0 to 599 Hz
Relative Humidity	5% to 95% (non-condensing)
Input Voltage	200 V to 480 V
Output Voltage	0 V to 480 V
Storage Temperature	-25 to +70 °C (-13 to 158 °F)