Lenze i950 Series - Operating Interfaces

Operang interfaces
Depending on the inverter, there are one or several opons for accessing the device parameters that are
available for customizing the drive task.
Simple access to the device parameters is provided by the Lenze Engineering Tool »EASY Starter«.
Connecon X16 is used as an interface for an engineering PC in this case.
Alternavely, the inverter can also be accessed via the oponal "PROFINET" network opons with the X256
or X257 connecons, or EtherNet/IP with the X266 or X267 connecons.
Commissioning
Oper
ang interfaces
174