To Next PageTo Next Page
Need help?Do you have a question about the Lenze X400 and is the answer not in the manual?
General| Power Supply | 24 VDC |
|---|---|
| Protection Class | IP65 (front) |
| Mounting | Panel mount |
| Operating Temperature | 0...+50 °C |
| Communication Interfaces | Ethernet, USB, RS232, RS485 |
| Processor | ARM-based |
| Display | TFT |
| Contrast Ratio | 500:1 |
| Backlight Lifetime | 50, 000 hours |
| Storage Temperature | -20...+60 °C |
| Relative Humidity | non-condensing |
| Power Consumption | 25 W |
| Interfaces | Ethernet, USB, RS232, RS485 |
Details the LCD display, navigation, and function keys on the front panel.
Describes the lock hook, release button, and diagnostic connector on the back.
Specifies validity information and identification codes for keypad and diagnosis terminal types.
Explains safety pictographs, signal words, and general usage precautions for safe operation.
Lists enclosure, ambient temperature, climatic conditions, pollution, and conformity approvals.
Guides through connecting the keypad, performing a self-test, and achieving operational readiness.
Explains the LCD display, all front panel keys, and menu navigation for device control.
Visual representation of the menu hierarchy and navigation paths for accessing functions.
Details keypad customization for display, starting values, STOP key, and status data.
