Need help?Do you have a question about the Lepro 3200LM and is the answer not in the manual?
Specifies tools necessary for installation but not provided with the product.
Details critical safety measures for installation, operation, and maintenance.
Details the process of attaching the mounting crossbar to the junction box.
Explains the electrical connection steps for the light fixture.
Covers the physical attachment of the light fixture to the mounting structure.
Specifies the ideal height range for mounting the fixture for maximum detection.
Details the duration the light remains on after motion detection.
Describes how to adjust the detection range based on sensitivity levels.
Light activates at maximum brightness upon motion detection at night.
Light stays low for 3 hours at dusk, then high on motion, switching to Auto.
Light stays low for 6 hours at dusk, then high on motion, switching to Auto.
Light stays on low from dusk to dawn, switching to highlight mode on motion.
The Lepro LED Motion-Activated Security Light is designed to provide enhanced outdoor security through intelligent motion detection and customizable lighting modes. This fixture is suitable for wall or eave mounting onto recessed or round surface-mounted electrical boxes rated for wet locations, ensuring versatility in installation. It is not suitable for ground mount electrical boxes.
The primary function of this security light is to automatically illuminate an area when motion is detected, thereby deterring intruders and enhancing visibility. The light utilizes a motion sensor that can detect movement up to 49 feet away, depending on ambient temperature and humidity. The detection distance is optimized at an ambient temperature of 77 degrees Fahrenheit with 30%-80% relative humidity. Temperature fluctuations can affect the detection range, with higher or lower temperatures potentially reducing it.
The light offers multiple operating modes to suit various needs:
The motion sensor is designed to be sensitive to motion that crosses its detection field rather than motion directly towards or away from it. This ensures more reliable triggering for security purposes. The sensor head can be adjusted up, down, left, and right to optimize the desired coverage area. For proper operation and protection against water damage, the motion sensor adjustment controls must always face downward.
The security light offers several adjustable settings to customize its operation:
The recommended installation height for the fixture is between 6.5 and 13 feet above the ground. At this height, the fixture provides optimal detection distance and coverage. The sensor head should be aimed towards the desired detection area with its controls facing the ground. It is crucial to ensure the motion detector head is not installed upside down.
To prevent nuisance triggers, the fixture should not be mounted near heat sources like air conditioners, vents, or furnace exhausts, or in a direction facing any reflective object or other nearby light source. Additionally, the sensor should not be placed within a 1.5-meter radius of a reflective object, as this can cause the lights to flash erratically.
Maintaining the Lepro LED Motion-Activated Security Light is straightforward, focusing on ensuring its longevity and proper function:
Troubleshooting tips are provided to address common issues such as the light not coming on at night, coming on during the day, or flashing on and off. These typically involve checking power supply, adjusting the sensor head, ensuring proper wiring, and relocating the light to avoid interference from other light sources or shaded areas.
General| Lumens | 3200 lm |
|---|---|
| Luminous Flux | 3200 lm |
| Power Consumption | 30W |
| Color Temperature | 5000K |
| CRI | 80+ |
| Lifespan | 50, 000 hours |
| Beam Angle | 120° |
| Material | Aluminum + PC |
| Certification | CE, RoHS |
To Next Page