Preparation before Measuring
1. Remove the label on the glass surface of the scale.
2. Place the scale on a solid flat surface. Carpeted or uneven floors
may affect accuracy.
3. Gently step on the scale to wake it up, and step on the scale again
to start measuring after the screen shows “0.00”.
Note: Please be sure to calibrate before use, otherwise you will
get inconsistent readings every time you step on.
Calibrating the scale
① Place the scale on a hard, flat surface.
② Step on the scale with one foot until
the readings appear on the screen.
③ Step off the scale. It will show “0.00”,
indicating that the calibration process is
complete.
To Next Page
Loading...