EasyManua.ls Logo

Letscom DL-1 - Page 13

Letscom DL-1
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 10 -
Select video resolution (pixels per
frame). Higher resolution produces
better quality videos, but creates
larger files that take more of the
Micro SD card capacity.
1920×1080
1280×720
720×480
640×480
320×240
Video
Resolution
(affects video
clips only)
Videos are in AVI format that can be
played back on most video players.
Long the recording, larger the file
size.
AVI 5s, optional
from 3S to 10M
Video
Length
(affects video
clips only)
If set On, videos have sound; if set
Off, videos have no sound. Videos
without sound take less of the Micro
SD card capacity.
On
Off
Audio
Recording
Shot Lag
30s, optional
from 5S to 60M
Select the shortest length of time
that the camera will wait until it
responds to any subsequent triggers
from the PIR sensor after a game is
first detected. During the selected
interval, the camera will not take
pictures/videos. This prevents the
Micro SD card from filling up with
too many redundant images.
If set On, the side motion sensors
work. This feature only works when
the camera mode has side motion
sensors.
On
Off
Side Motion
Sensors
Select the sensitivity of the PIR
sensor. The High setting suits
indoors and environments with little
interference, while the Middle/Low
suits outdoors and environments
with more interference.
Temperature also affects the
sensitivity. The High setting is
suitable when the ambient
temperature is warm, and the Low
setting is helpful in cold weather.
High,
Middle,
Low
Sensitivity
Motion
Sensors
(Sense
level)