2) To take out the Micro SD card, just gently push in the card and
then it will pop out of the slot. The card is released from the slot
and ready to be removed when you hear the click.
3) Be sure the camera's power is switched OFF before inserting or
removing Micro SD cards or batteries.
SAFETY AND WARRANTY
Important Safety Instructions
This camera is a precision electronic device. Do not attempt to
service this camera yourself, as opening or removing covers may
expose you to dangerous electrical charge along with other risks.
The camera is designed to be weather resistant. Never attempt to
immerse the unit in water or any other liquid. This will damage the
unit and void the warranty.
Do not exposure the camera to the outdoors for a long time. We
recommend installing the camera in places with eaves.
Make sure the camera is locked secure with the lock buckles and
the internal insulation pad is not damaged when installing it
outdoors.
Do not mix old and new batteries.
Do not mix alkaline, standard, or rechargeable batteries.
Use a soft lens cloth for cleaning lens. Avoid touching lens with
fingers.
Remove dirt or stains with a soft cloth dampened with water or
neutral detergent.
Keep your camera in a dry and cool dust-free environment or
container when it is NOT used.
Remove batteries when camera is NOT in use for an extended
period of time.
Avoid dropping your camera on to a hard surface.
Do not disassemble your camera.
Do not access the camera’s internal components compartment for
unauthorized service, as this could cause serious damage to the
unit and WILL void the warranty.
- 19 -
To Next Page
Loading...