- 12 -
On
Off
Yes
No
Set up a password to protect your
camera from unauthorized users.
If you forget the password, switch
the camera to the OFF mode, press
the MENU and REPLAY keys at the
same time, and then switch the
operating mode from OFF to SETUP.
The camera is unlocked. Then you
can set the Password Protection on
and set a new password in "MENU"--
"Password Protection".
On
Off
On
Off
Password
Protection
If set On, the camera will beep when
you press any key of the camera in
the SETUP mode.
Beep Sound
Format
Memory Card
Yes
No
All files will be deleted after
formatting the Micro SD card. Highly
recommend you format the Micro SD
card if it has been used previously in
other devices.
Caution: make sure wanted files on
the Micro SD card have been
backed up before reformat or they
will be lost permanently.
Select On to assign a serial
number to each camera you have.
You can use the combination of 4
digits to record the location in the
photos (e.g. 1234 for Yellow Stone
Park). This helps multi-camera
users identify the location when
reviewing the photos.
Serial No.
Select Yes to return all your
previous settings back to the
manufacturer default.
Reset
Settings
Display the version of the camera.DefinedVersion
To Next Page
Loading...