21
TO INPUT THE STRIKING DISTANCE OF THE 8, 6 AND 4-IRON (GX-2i
3
ONLY):
NOTE:
Though we strongly recommend inputting the specific distances obtained with
each of the irons mentioned above, the specialized algorithms used by the GX-2i
3
will
make logical assumptions about the remaining club(s) if specific
distances are not known for one or more of the remaining
clubs. By inputting your hitting distances, you will customize the
rangefinder to your game. Leaving the GX-2i
3
in default mode
will achieve typical variances of +/- 1 club length.
*Reminder: You cannot input a distance value less than or
equal to the previous club. For example, if you choose 155
yards for your 8-iron, the lowest available distance for your 6-iron will be 160 yards.
Use MODE to navigate through the Quick Set Menu until TGR (SU) is displayed;
1) The 8-iron symbol will be highlighted and the last saved distance will
be shown in the upper numeric display. If you wish to input a distance
other than the one shown, proceed to step 2. To save the shown distance for your
8-iron, press MODE and skip to step 3 below.
in
cm
M
Y
ft
L
O
S
C
L
U
B
T
G
R
To Next Page
Loading...
Need help?
General
