29
HOW DO I ACTIVATE THE INCLINOMETER? (GX-2i
3
ONLY)
Yes, TGR can be used without entering the Club Selector values, it will simply use the
default settings appropriate for the average player. Entering your specific values will
improve accuracy up to one club length.
TROUBLE SHOOTING
PRISM LOCK ISN’T WORKING (NO AUDIABLE BEEP):
Prism Lock only works when in Scan Mode. By pressing and holding POWER you will
get constant updated distance readings until the laser hits the prism.
TGR must be activated, at which time the inclinometer will be activated
automatically.
HOW DO I RESET THE UNIT TO FACTORY SETTINGS?
Press and hold POWER and MODE simultaneously for at least 10 seconds.
CAN I USE TGR WITHOUT MANUALLY INPUTTING DISTANCES FOR AN 8, 6, OR 4-IRON?
To Next Page
Loading...
Need help?
General
