27
TO CHOOSE A PARTICULAR AIMING RETICLE/CROSSHAIR:
1) Press POWER to activate the rangefinder.
2) Press and hold MODE for at least 2 seconds to enter the Quick Set Menu.
3) Press and release MODE repeatedly until the reticle is flashing.
4) While the reticle is flashing, press and release POWER
5) Continue pressing and releasing POWER until the desired reticle is flashing.
Press and release MODE to save your selection.
6) To save the changes and return to ranging mode, let the unit sit idle for a least 30
seconds until an automatic power-down occurs, or simply press and hold MODE
for at least 2 seconds. To continue through the Quick Set Menu and manipulate
another feature, press and release MODE until the appropriate icon is displayed.
To Next Page
Loading...
Need help?
General
