17
Use MODE to navigate through the Quick Set Menu until TGR
(SU) is displayed;
1) The 8-iron symbol will be highlighted and the last saved
distance will be shown in the upper numeric display. If you
wish to input a distance other than the one shown, proceed
to step 2. To save the shown distance for your 8-iron, press
MODE and skip to step 3 below.
2) Press POWER to set the distance obtained with your 8-iron.
Each depression of POWER will increase the distance
associated with your 8-iron shot in 5-yard/meter increments
beginning with the last saved distance, until 200 yards (185
meters) is reached. Once 200 yards (185 meters) is reached, it
will reset to 60 yards (55 meters), and start over again. When
the appropriate distance is displayed, press MODE.
3) The 6-iron symbol will now be highlighted and the last saved
distance will be shown in the upper
numeric display. If you wish to input
a distance other than the one shown,
proceed to step 4. To save the shown
distance for your 6-iron, press MODE and
skip to step 5 below.
in
cm
M
Y
ft
L
O
S
C
L
U
B
T
G
R
To Next Page
Loading...
Need help?
General
