20
press and hold MODE for at least 2 seconds. To continue
through the Quick Set Menu and manipulate another
function, press and release MODE until the
appropriate icon is displayed.
4) Press POWER to begin incrementing
through the altitude settings. The default
setting is 1,000 feet. Pressing POWER will
increment through a range of 0 feet to
9,999 feet in 500 foot increments.
When the appropriate altitude is displayed, press and release
MODE to save the selection. The process for setting up the
temperature and altitude at which the striking distances were
measured is complete. To return to ranging mode, press and hold
MODE for at least 2 seconds. To continue through the Quick Set
Menu and manipulate another function, press and release MODE
until the appropriate icon is displayed.
SELECTABLE RETICLES
This mode is used to choose from one of 7 preloaded aiming
reticles for your GX series digital rangefinder. To select a
reticle, press MODE repeatedly until the reticle begins flashing.
Each time POWER is depressed the reticle style will change.
Press and release MODE to select a reticle. The reticle choices
are as follows:
in
cm
M
Y
ft
L
O
S
C
L
U
B
T
G
R
To Next Page
Loading...
Need help?
General
