Commissioning and configuration
Leuze electronic BCL 548i 149
TNT 35/7-24V
Input data length
1 byte
Output data
None
Remarks
The following bits are constantly updated, i.e. they are updated immediately after the
respective event occurs:
Reading gate state
• Further results in the buffer
• Buffer overflow
• Waiting for acknowledgement
All other flags refer to the currently output decoding result.
If the input data is reset to the init. value (cf. "Module 30 – Data formatting" on page 152),
the following bits are reset:
•New result
•Result state
All others remain unchanged.
Data reset behavior:
Upon data reset (see Module 10 – Activations), the input data is deleted, except for the
reading gate status and the two toggle bits.
To Next Page
Loading...
