LevelOne FCS-5011 - Page 101

audioin_codec <a list of the
available codec
types separaters
by comma>
0/7 Available codec list
audioout_codec <a list of the
available codec
types separaters
by comma>
0/7 Available codec list
uart_httptunnel <boolean> 0/7 Indicate whether to
support the http tunnel
for uart transfer
transmission_
mode
Tx, Rx 0/7
Indicate what kind of
transmission mode the
machine used. TX: server,
Rx: receiver box
network_wire
<boolean> 0/7 Indicate whether to
support the Ethernet
network_wireless <boolean> 0/7 Indicate whether to
support the wireless
wireless_
802dot11b
<boolean> 0/7 Indicate whether to
support the wireless
802.11b+
wireless_
802dot11g
<boolean> 0/7 Indicate whether to
support the wireless
802.11g
wireless_
encrypt_wep
<boolean> 0/7 Indicate whether to
support the wireless
WEP
wireless_
encrypt_wpa
<boolean> 0/7 Indicate whether to
support the wireless
WPA
wireless_encrypt
_wpa2
<boolean> 0/7 Indicate whether to
support the wireless
WPA2
Group: event_i<0~2>
Name Value Security
(get/set)
Description
name string[40] 6/6 The identification of this entry
enable 0,
1
6/6 To enable or disable this event.
0 => Disable
1 => Enable
priority 0,
1,
2
6/6 Indicate the priority of this event.
0 => indicates low priority.
1 => indicates normal priority.
2 => indicates high priority.
delay 1~999 6/6 Delay seconds before detect next event.
trigger boot,
di,
motion,
seq
6/6 Indicate the trigger condition.
boot => system boot.
di => digital input.
motion => video motion detection.
seq => periodic condition.
visignal => indicates video input signal
loss.