Need help?Do you have a question about the LevelOne FCS-5041 and is the answer not in the manual?
Step-by-step guide for physically mounting the network camera.
Details how to connect the camera using PoE technology, including switch types.
Instructions on setting up a password for security.
Settings for camera image quality, video streams, codecs, and resolution.
Settings for managing different camera profiles based on conditions.
Configuration for network IP addressing modes (DHCP, Static IP, PPPoE).
Configuration for defining events and their trigger conditions.
Configuration for motion detection zones and sensitivity.
Instructions for upgrading the camera's firmware.
Step-by-step guide for physically mounting the network camera.
Details how to connect the camera using PoE technology, including switch types.
Instructions on setting up a password for security.
Settings for camera image quality, video streams, codecs, and resolution.
Settings for managing different camera profiles based on conditions.
Configuration for network IP addressing modes (DHCP, Static IP, PPPoE).
Configuration for defining events and their trigger conditions.
Configuration for motion detection zones and sensitivity.
Instructions for upgrading the camera's firmware.
General| Camera Type | Fixed Dome |
|---|---|
| Resolution | 1920 x 1080 |
| Lens | Fixed |
| Focal Length | 3.6 mm |
| Aperture | F2.0 |
| Video Compression | H.264, MJPEG |
| Frame Rate | 30 fps |
| Network Interface | 10/100Mbps Ethernet |
| Connectivity | Wired |
| Day/Night | Yes |
| Protocols | TCP/IP, DHCP, DNS, DDNS, RTP/RTCP, RTSP, PPPoE, SMTP, NTP, UPnP, FTP |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to 50°C |
| Minimum Illumination | 0 Lux |
To Next Page