Network Camera User’s Manual
28/56
DDNS Setting
1. “Enable DDNS” This option turns on the DDNS function.
2. “ip-discovery” In the Register column, fill in the Host name (xxxx. ip-discovery),
Email, Key, and Confirm Key, then click Register. After a host name has been
successfully created, a success message will be displayed in the DDNS Registration
Result column and messaging E-mail.
3. “3rd party DDNS” This is enable or disable 3
rd
party DDNS.
4. “Provider” The provider list contains hosts that provide DDNS services. Please
connect to the service provider’s website to make sure the service charges.
5. “Host Name” If the User wants to use DDNS service, this field must be filled.
Please input the hostname that is registered in the DDNS server.
6. “User name” The Username or E-mail field is necessary for logging in the DDNS
server or notify the User of the new IP address.
Note: when this field is input as “User name”, the following field must be input as
“Password”.
7. “Password” Please input the password or key to get the DDNS service.
8. “finish” Click on this button to save modify settings for the DDNS service.
To Next Page
Loading...
